Beyond
from the depths
Explore
Innovate
Secure
Drilleex, the local mining drilling mining survey
Founded in 2016, Drilleex specializes in the design and execution of all types of drilling:
RC drilling, RAB, diamond drilling and hydraulic drilling.
Our EXPLORATIONS
Reverse drilling (RC)
Reverse circulation drilling is a drilling technique for continuously recovering dried samples. Drilling is performed using a down-the-hole down-the-hole hammer. Samples are drawn up through the rods from inside the hammer, avoiding any contact between the samples and the wall of the drilled hole. This fast drilling technique is generally performed in 150 mm diameters, at depths between 50 and 300 meters. Our equipment can reach depths of up to 500 metres.
RAB drilling
Roto-percussion air drilling is the simplest and most economical solutionin mining exploration. Carried out with a tri-blade or down-the-hole hammer, usually between 3'' and 3'' 1/2 in diameter, samples emerge along the walls of the drilled hole. This technique enables us to get an idea of a site's mineral potential at low cost, with the disadvantage of contaminated samples contaminated samples, as they pass through the borehole wall unprotected. However, to obtain samples without any wall contamination, reverse circulation or diamond drilling techniques must be used...
RAB drilling
Roto-percussion air drilling is the simplest and most economical solutionin mining exploration. Carried out with a tri-blade or down-the-hole hammer, usually between 3'' and 3'' 1/2 in diameter, samples emerge along the walls of the drilled hole. This technique enables us to get an idea of a site's mineral potential at low cost, with the disadvantage of contaminated samples contaminated samples, as they pass through the borehole wall unprotected. However, to obtain samples without any wall contamination, reverse circulation or diamond drilling techniques must be used...
Diamond drilling
Diamond drilling is used in the mining industry to probe the ore content of potential deposits. By removing a small-diameter core diameter core from a rock in a deposit, geologists can analyze the core by chemical determination and carry out metrological studies, structural and mineralogical studies of the rock and other properties. Using different diameters of diamond core bits (BQ, HQ, NQ, PQ), our equipment can reach depths of over 1600m.
Hydraulic drilling
Hydraulic drilling is one of our core businesses. Our drilling rigs can reach depths of 450 m for this type of drilling.
Hydraulic drilling
Hydraulic drilling is one of our core businesses. Our drilling rigs can reach depths of 450 m for this type of drilling.